16-10-2022, 03:31 PM
Bluesky gel polish requires a base coat and top coat as well as the use of an LED/UV lamp to cure each layer.
Instructions: -File your nails to the desired shape.
-Push back your cuticles and trim if necessary.
-Gently buff your nails to remove the shine from the top of your nails so the gel can adhere to them.
-Clean your nails with a Bluesky Cleanser Wipe - to remove any dust and debris and to clean your nails before beginning.
-Make sure you keep your Bluesky gel products away from your nail lamp and out of direct sunlight - this is because gel cures when exposed to light, so even a small amount of light exposure can be enough to begin the curing process.
-Apply the gel remembering, the thinner the coats the better the finish.
-Apply a thin layer of Bluesky Base Coat to all five nails, capping the ends.
Avoid the skin and cuticle.
-Cure for 60 seconds under the Bluesky Lamp, it will still be tacky but this is normal, as this is what allows the next coat to bond to the gel base.
-Apply your chosen colour coat in the same way as the base coat; a thin coat, cap the end, avoid your skin.
-Cure the Gel Polish for 60 seconds.
-Repeat the 2 steps above to build up the colour each time.
1 coat will give a sheer finish, 2 is normal, 3 will be a solid colour.
-Apply a thin layer of Bluesky Top Coat just like all the others.
-Cure the Gel Top Coat for 60 seconds.
-Use a Bluesky Cleanser Wipe to remove the sticky residue leaving super shiny nails.
Bluesky gel polish is 7-free and doesn't contain the 3 common chemicals that can be found in nail polishes (Toluene, Dibutyl Phthalate (DBP), Formaldehyde), and does not contain 4 other chemicals (Formaldehyde Resin, Camphor, TPHP and Xylene).
Bluesky products are and always will be cruelty-free - They never test on animals! and they are also registered by The Vegan Society as Vegan Friendly and registered by PETA as Cruelty Free.
Instructions: -File your nails to the desired shape.
-Push back your cuticles and trim if necessary.
-Gently buff your nails to remove the shine from the top of your nails so the gel can adhere to them.
-Clean your nails with a Bluesky Cleanser Wipe - to remove any dust and debris and to clean your nails before beginning.
-Make sure you keep your Bluesky gel products away from your nail lamp and out of direct sunlight - this is because gel cures when exposed to light, so even a small amount of light exposure can be enough to begin the curing process.
-Apply the gel remembering, the thinner the coats the better the finish.
-Apply a thin layer of Bluesky Base Coat to all five nails, capping the ends.
Avoid the skin and cuticle.
-Cure for 60 seconds under the Bluesky Lamp, it will still be tacky but this is normal, as this is what allows the next coat to bond to the gel base.
-Apply your chosen colour coat in the same way as the base coat; a thin coat, cap the end, avoid your skin.
-Cure the Gel Polish for 60 seconds.
-Repeat the 2 steps above to build up the colour each time.
1 coat will give a sheer finish, 2 is normal, 3 will be a solid colour.
-Apply a thin layer of Bluesky Top Coat just like all the others.
-Cure the Gel Top Coat for 60 seconds.
-Use a Bluesky Cleanser Wipe to remove the sticky residue leaving super shiny nails.
Bluesky gel polish is 7-free and doesn't contain the 3 common chemicals that can be found in nail polishes (Toluene, Dibutyl Phthalate (DBP), Formaldehyde), and does not contain 4 other chemicals (Formaldehyde Resin, Camphor, TPHP and Xylene).
Bluesky products are and always will be cruelty-free - They never test on animals! and they are also registered by The Vegan Society as Vegan Friendly and registered by PETA as Cruelty Free.
| brand | Bluesky |
| ean | 6941175876233 |